Replacement Cable for AKG K430, K450, K451, K452, K480 & Q460 – 1.5m

$14.95 Inc GST

  • Fits Six Models – one akg k450 replacement cable covers the whole AKG family
  • 5mm At The Earcup End – the slim plug these headphones take, 3.5mm to source
  • Oxygen-Free Copper – resists the corrosion that causes crackle and dead channels
  • Melbourne Stock, Model Checked – same-day dispatch before 10am, 90-day warranty

16 in stock

Title Range Discount
Buy 2 - 3 10%
Buy 4 - 5 12.5%
Buy 6 + 15%
SKU: CAB-135 Category:

Description

An akg k450 replacement cable is a part these headphones were designed to need. AKG made the lead detachable precisely because it is the component that wears out first, and a set that sounds dead on one side is almost always a cable problem rather than a driver problem.

One akg k450 replacement cable, six headphone models

The same cable serves the K430, K450, K451, K452, K480 and Q460. AKG used one 2.5mm socket across that whole run of folding on-ear sets, so an akg k450 replacement cable is the right part whichever of the six you own.

That is worth knowing before you go hunting for a model-specific listing that does not exist, or paying a premium for one that claims to. If your headphones fold flat, have a single socket in the left earcup and came out of that era, this is almost certainly what you need.

It is a 2.5mm to 3.5mm cable, and the small end is the one to check

This is where wrong orders happen. Both ends look like headphone jacks, but they are not the same size.

The end that plugs into your headphones is 2.5mm — noticeably slimmer than a standard headphone plug. The end that goes to your phone, laptop or amplifier is the familiar 3.5mm. That pairing is the whole product: a 2.5mm to 3.5mm cable. A standard 3.5mm-to-3.5mm aux lead will not fit the earcup, and reaching for one is the most common mistake made here.

If you are unsure, hold a normal headphone plug against the socket in the earcup. If it is obviously too fat to go in, an akg k450 replacement cable is what you are after.

What the specification actually means

Oxygen-free copper is the conductor in this akg k450 replacement cable. The practical benefit is not audible magic — it is corrosion resistance. Ordinary copper oxidises where it flexes and where it meets the plug, and that oxidation is what produces the crackle and the dead channel years down the line. It is the reason an akg k450 replacement cable is a consumable rather than a one-time purchase. Oxygen-free copper resists it for longer, which on a wear part is the whole point.

A TPE jacket wraps the whole 2.5mm to 3.5mm cable. It matters because a headphone cable lives in a bag and gets wound around a hand, and TPE returns to shape rather than kinking permanently the way cheaper PVC does.

1.5 metres makes this akg k450 replacement cable longer than the short cord most of these headphones shipped with, which suits desk and laptop use far better.

One thing to know before ordering

This cable has no in-line microphone or remote. It is a straight audio lead. If you take calls on your headphones or use the volume buttons, you want a version with a mic instead, and an akg headphone cable with call control is a different product — tell us and we will point you at one rather than sell you the wrong thing.

For listening only, the absence of a mic is an advantage: one less component in the signal path and one less thing to fail. It is also why this akg headphone cable costs what it does — you are not paying for a remote you will never press.

Why purchase this cable from Core Connect Aust?

This akg k450 replacement cable is stocked in Melbourne and ready to go — order before 10am and your 2.5mm to 3.5mm cable ships the same day via Australia Post with insurance, backed by our 90-day warranty and a team who will check your model before you spend anything.

A set of headphones is only as good as the lead attached to it, and this is the cheapest part of the whole thing to put right. Working headphones, one inexpensive part. Order your akg k450 replacement cable today.

Compatibility

One cable covers the whole family. AKG used the same 2.5mm socket across this run of folding on-ear headphones, so there is no model-specific version to hunt for.

Confirmed compatible with:

  • AKG K430
  • AKG K450
  • AKG K451
  • AKG K452
  • AKG K480
  • AKG Q460

How to check yours. The socket sits in the left earcup and takes a 2.5mm plug — visibly slimmer than the 3.5mm plug on a normal pair of headphones. If a standard aux lead is too fat to go in, this is the cable you need.

No microphone or remote. This is a straight audio lead with no in-line controls. If you take calls on these headphones, ask us about a version with a mic instead.

Core Connect Aust is not affiliated with, endorsed by, or sponsored by AKG or Harman. All brand and model names are trademarks of their respective owners and are used here for compatibility reference only. This is an aftermarket accessory, not a manufacturer-branded product.

  • Colour : Black
  • Length : 1.5m (4.9ft)
  • Power capability : Not applicable — passive audio cable, carries no power
  • Data transfer speeds (Maximum) : Not applicable — analogue audio only
  • Connector A (Gender/Type/Version) : Male / 2.5mm TRS / headphone end
  • Connector B (Gender/Type/Version) : Male / 3.5mm TRS / source end
  • Cable Material : Oxygen-free copper conductor, TPE outer jacket
  • Certifications : FCC/CE/RoHS

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

DETAILS
Click & Collect Address:
339 Somerville Rd, Yarraville, VIC 3013
Phone : 03 9088 7510
Email : support@coreconnectaust.com.au

The Cable Guy Australia Pty Ltd Trading As Core Connect Aust · ABN 20 668 646 437
Subscribe to our newsletter
The latest news, articles, and resources, sent to your inbox monthly.

    The Cable Guy Australia Pty Ltd Trading As Core Connect Aust · ABN 20 668 646 437