Charging Cable for Fitbit Charge HR – Replacement, USB-A, Charge Only

$14.95 Inc GST

  • Fits the Fitbit Charge HR only – not the first-generation Charge, not the Force, not the Charge 2 or anything after it
  • Band stays on – seat the end of the tracker in the head and push until it is fully home
  • Plugs into any USB-A port – wall charger, laptop, power bank or car socket, and a full charge takes one to two hours
  • Melbourne stock, same-day dispatch before 10am – backed by a 90-day warranty

9 in stock

Title Range Discount
Buy 2 - 3 10%
Buy 4 - 5 12.5%
Buy 6 + 15%
SKU: CAB-065CHR Category:

Description

A fitbit charge hr charger is its own part. It looks close to the lead the first Charge uses, it is not the same lead, and that one word in the model name is the single commonest reason the wrong one arrives.

⚠️ The Charge HR takes a different lead from the Charge

If the back of the tracker says “Charge HR”, this is the one you want. If it says “Charge” with nothing after it, it is not.

⭐ The Charge family changed its attachment three times and split within a generation. The first Charge and the Force share a lead. ⚠️ The Charge HR has its own. The Charge 2 clips. The Charge 3 and Charge 4 clip differently again. The Charge 5, Charge 6 and Luxe are magnetic.

⭐ So there are five separate leads across eight trackers, and a fitbit charge hr charger will not do duty for any of the others.

How a fitbit charge hr charger goes on

Seat the end of the tracker in the head and push it home until it is fully in.

⭐ You will see a battery symbol within a second or two. The band stays on — no Fitbit charger has ever needed a band removed, whatever a listing might tell you.

⚠️ If nothing happens, it is almost always not fully home. A fitbit charge hr charger that looks connected but sits a millimetre proud makes no contact at all, and that is the commonest reason a working lead gets sent back.

A fitbit charge hr charger that stopped working — in order

⭐ Clean the contacts first. After ten years there is a film of skin oil and sunscreen across the pads on the tracker and the pins in the lead. A dry cloth, or a cotton bud with a little isopropyl alcohol.

⭐ Then press it home properly. The fit slackens with age and wants more pressure than it used to.

⭐ Then change the USB port. These trackers draw very little current, and a marginal hub or car socket fails quietly rather than obviously.

⚠️ Only then suspect the fitbit charge hr charging cable itself. A fitbit charge hr charging cable that works at one particular angle has broken at the flex point behind the head, and cleaning will not bring it back.

⭐ Why this one is hard to replace

The Charge HR launched in 2015 and Fitbit stopped selling leads for it years ago.

⭐ The trackers often still work — that is why people come looking. ⚠️ What has failed is the fitbit charge hr charging cable, and there is nothing in a drawer that fits: not a Charge lead, not a Charge 2 clip, and certainly nothing magnetic. A fitbit charge hr charging cable is the whole difference between a working tracker and a dead one.

⭐ If yours is still going, a spare is worth having now rather than when the current one gives up, because this part gets harder to find every year.

What it does, plainly

Charge only. A fitbit charge hr charger carries power and nothing else — the Charge HR syncs over Bluetooth. It plugs into any USB-A port: wall charger, laptop, power bank or car socket.

⭐ A fitbit charge hr charger does not set the speed — the tracker does. A full charge takes one to two hours and gives about five days of use.

What we are not claiming

That it fits the first-generation Charge, the Force, or anything from the Charge 2 onwards. Five different leads, eight trackers.

That it charges faster. The tracker governs the rate, and a fitbit charge hr charger cannot change that.

That a fitbit charge hr charger needs the band removed. It does not, and neither does any other Fitbit.

Why purchase this cable from Core Connect Aust?

This fitbit charge hr charger is stocked here in Melbourne and ready to go — order before 10am and your fitbit charge hr charging cable ships the same day via Australia Post with tracking and insurance, backed by our 90-day warranty and a team who will ask which Charge you own before you spend anything.

Order your fitbit charge hr charger today.

What it charges

The Fitbit Charge HR, and only the Fitbit Charge HR.

  • Fitbit Charge HR — the 2015 model, every colour and size

⭐ One model, because this generation split within itself. The Charge HR does not share a lead with the Charge that came out beside it.

⚠️ If the back of your tracker says anything else, this is not your lead:

  • The first Charge and the Force share a different lead
  • The Charge 2 clips
  • The Charge 3 and Charge 4 clip differently again
  • The Charge 5, Charge 6 and Luxe are magnetic

We stock those separately. Tell us exactly what is printed on the back of the tracker — including whether “HR” is there — and we will point you at the right one.

And it will not charge faster than the tracker allows. Charging rate is set by the Charge HR, not by the lead.

  • Colour : Black
  • Power capability : 5V DC from the USB-A port. The tracker governs the charge rate
  • Data transfer speeds (Maximum) : Charge only — no data transfer
  • Connector A (Gender/Type/Version) : Male / USB-A / USB 2.0
  • Connector B (Gender/Type/Version) : Proprietary Fitbit Charge HR charging head
  • Fits : Fitbit Charge HR (2015) only
  • Attachment : The tracker’s end seats into the head — push until it is fully home
  • Magnetic : No
  • Band removal : Not required
  • Function : Charging only. The Charge HR syncs over Bluetooth
  • Power source required : Any 5V USB-A port — wall charger, laptop, power bank or car socket
  • Cross-generation fit : None. The first-generation Charge and the Force use a different lead, and every model from the Charge 2 onwards uses another again

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

DETAILS
Click & Collect Address:
339 Somerville Rd, Yarraville, VIC 3013
Phone : 03 9088 7510
Email : support@coreconnectaust.com.au

The Cable Guy Australia Pty Ltd Trading As Core Connect Aust · ABN 20 668 646 437
Subscribe to our newsletter
The latest news, articles, and resources, sent to your inbox monthly.

    The Cable Guy Australia Pty Ltd Trading As Core Connect Aust · ABN 20 668 646 437