Charging Cable for Fitbit Surge – Clamp Charger, USB-A, Charge Only

$14.95 Inc GST

  • Still Stocked – the shops stopped carrying these years ago, we did not
  • Fits the Surge Clamp – sprung pins onto the case-back contacts, model-specific
  • Any USB-A Port – wall plug, laptop or power bank, nothing proprietary at the wall
  • Melbourne Stock, 90-Day Warranty – your fitbit surge charger cable ships same day

15 in stock

Title Range Discount
Buy 2 - 3 10%
Buy 4 - 5 12.5%
Buy 6 + 15%
SKU: CAB-041SRG Category:

Description

If your Surge is still going, a replacement fitbit surge charger cable is getting hard to find — and that is the whole reason this page exists. The watch was discontinued years ago, the shops stopped carrying the accessory long before that, and the clamp is proprietary, so nothing else in a drawer will fit it. We hold stock.

Why this is the hard part to replace

The Surge does not charge over USB, magnets or a pad. It uses a moulded clamp that grips the body of the watch and presses spring-loaded pins onto contacts on the back of the case. That design is specific to this model and a handful of its contemporaries — there is no adapter, no workaround, and no standard equivalent.

Which means that when the cable goes, the watch stops being a watch. Not because the watch failed, but because a $15 accessory did.

What usually goes wrong

Almost always the clamp, not the cable. Years of opening and closing the same hinge wears the grip, and a clamp that no longer holds firm lets the pins sit a fraction off the contacts. You see it as a watch that charges only when you push down on it, or one that reports charging and then quietly stops overnight.

The other common failure is the short section of cord immediately behind the clamp, which flexes every time the watch is taken off charge. By the time a Surge is this old, both have had a long working life.

Before you order, one quick check. Wipe the contacts on the back of the watch with a dry cloth. Sweat and skin oil build a film across them over years of wear, and that alone stops a charge often enough to be worth thirty seconds. If it charges after a clean, you have saved yourself the postage.

What a fitbit surge charger cable actually is

A moulded clamp with sprung contacts, a standard USB-A plug at the far end, and enough cord to reach a wall plug or a laptop port. It is charge-only — the Surge syncs over Bluetooth, so no data crosses this connection.

There is nothing clever to say about it. A fitbit surge charging cable is a simple part that has become scarce, and the only thing that matters is that it fits properly and that someone still has one.

Worth buying two

Not a sales line — the arithmetic on a discontinued accessory is different from a current one. With a current-model watch, if the cable fails in two years you buy another one. With a Surge there is no guarantee anyone will be importing these in two years, and when the last of them goes the watch goes with it.

A spare costs less than a replacement fitness tracker and it removes the only single point of failure the watch has left. If you intend to keep wearing it, buy the second one now rather than hoping later.

Compatibility

Made for the Fitbit Surge and nothing else. Fitbit changed its charging design several times, and none of the later clips or cradles are interchangeable with this clamp — if you are not certain which model you have, send us a photo of the back of the watch before you order.

Why purchase this cable from Core Connect Aust?

This charger for the Fitbit Surge is stocked in Melbourne and ready to go — order before 10am and your fitbit surge charging cable ships the same day via Australia Post with insurance, backed by our 90-day warranty and a team who will check you have the right model before you spend anything.

Keep a working watch working. Order your fitbit surge charger cable today, while they are still around.

Compatible with:

  • Fitbit Surge — all sizes and colourways

Made for this model alone. Fitbit changed its charging design several times across the range, and no later clip, clamp or cradle is interchangeable with this one. If you are not certain which watch you have, send us a photo of the back of the case before ordering.

Core Connect Aust is not affiliated with, endorsed by, or sponsored by Fitbit or Google. All brand and model names are trademarks of their respective owners and are used here for compatibility reference only. This is an aftermarket accessory, not a manufacturer-branded product.

  • Colour : Black 
  • Length : 1M
  • Power capability : 5V DC at 1A
  • Data transfer speeds (Maximum) : Charge only — no data transfer
  • Connector A (Gender/Type/Version) : Male / USB-A / USB 2.0
  • Connector B (Gender/Type/Version) : Clamp / Sprung pin contacts / Fitbit Surge pattern
  • Cable Material : PVC
  • Certifications : FCC/CE/RoHS

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

DETAILS
Click & Collect Address:
339 Somerville Rd, Yarraville, VIC 3013
Phone : 03 9088 7510
Email : support@coreconnectaust.com.au

The Cable Guy Australia Pty Ltd Trading As Core Connect Aust · ABN 20 668 646 437
Subscribe to our newsletter
The latest news, articles, and resources, sent to your inbox monthly.

    The Cable Guy Australia Pty Ltd Trading As Core Connect Aust · ABN 20 668 646 437