3.5mm to 6.35mm Audio Adapter – Takes a 3.5mm Plug, Gold

$12.99 Inc GST

  • Takes a 3.5mm Plug, Fits a 6.35mm Socket – the direction, stated first
  • Gold-Plated Contacts – an analogue signal this small is where plating earns its keep
  • Stereo, Passive, Nothing to Set Up – three conductors through, no power, no electronics
  • Melbourne Stock, Not a Dropship – dispatched before 10am with a 90-day warranty

22 in stock

Title Range Discount
Buy 2 - 3 10%
Buy 4 - 5 12.5%
Buy 6 + 15%
SKU: ADP-002 Categories: ,

Description

A 3.5 mm jack to 6.35 mm jack adapter is a short gold-plated barrel: a 6.35mm plug at one end, a 3.5mm socket at the other. It lets ordinary headphones or earbuds plug into the big quarter-inch socket on an amplifier, mixer, audio interface or keyboard.

Which direction this one goes, because the two are not interchangeable

This adapter steps UP. The small socket takes your 3.5mm plug; the large plug goes into the equipment.

If you need the opposite — a 6.35mm plug from studio headphones going into a phone or laptop — that is the other adapter, and it will not work in place of this one. The plug and socket are reversed and nothing about them is reversible.

Look at what you are holding. A 3.5mm plug in your hand and a big socket on the gear means this is the part. A 3.5 mm jack to 6.35 mm jack adapter only ever works in that one direction, and the two versions cost the same, so the only way to get it wrong is not to check.

What it is for

  • Studio and hi-fi amplifiers, which almost always use the 6.35mm socket
  • Guitar and keyboard amplifiers with a headphone output
  • Mixing desks and audio interfaces
  • Electronic drum kits and digital pianos
  • Older AV receivers, where the front headphone socket is the large size

The quarter-inch socket has not gone anywhere. It is still standard on almost everything made for music rather than for phones, which is why a 3.5 mm to 6.35 mm adapter outlives most of the gear it plugs into.

It is also the cheapest way to keep using headphones you already like. Studio monitoring headphones are expensive and last for years; the earbuds in your pocket cost nothing and are already in your hand. Either way the socket on the amplifier is the wrong size, and a 3.5 to 6.35 adapter is the whole fix.

Why gold plating is worth something here

The contacts are gold-plated. On a signal this small that matters more than it would on a power connector — a headphone signal is a few milliwatts, and a corroded contact on an analogue line shows up as crackle when the plug is moved, not as a clean failure.

It is also a connector that gets left in place for years on the back of an amplifier in an Australian summer. Gold does not oxidise, so the joint stays quiet.

It stays put

The barrel is knurled, so it can be fitted and removed by hand without pliers and without twisting the lead. On gear that lives on a stand or behind a desk that is worth more than it sounds — the usual way these get damaged is being levered out sideways.

It is passive, and that is the whole point

No electronics, no power, nothing to go wrong. The signal passes through unchanged.

Stereo is preserved — three conductors in, three conductors out, left and right both carried.

⚠️ What it does not do: it is not a TRS-to-TRS balanced converter and it is not a microphone adapter. It carries a stereo headphone signal between two sizes of the same connector. If your gear needs a balanced line, that is a different part.

The size, and the number people get wrong

The large connector is 6.35mm, which is a quarter of an inch. It is frequently written as 6.5mm, including in places that should know better, and 6.5mm is not a real audio connector size. If you are comparing listings and one says 6.5, it almost certainly means this.

The small one is 3.5mm, sometimes called a mini-jack or an aux connector.

So a 3.5 mm to 6.35 mm adapter, a 3.5mm to 1/4 inch adapter and a quarter-inch headphone adapter are all the same object. The names vary; the part does not.

Why purchase this adapter from Core Connect Aust?

This 3.5 mm jack to 6.35 mm jack adapter is stocked in Melbourne and ready to go — order before 10am and your 3.5 to 6.35 adapter ships the same day via Australia Post with insurance, backed by our 90-day warranty and a team who can confirm which direction you need before you order.

Stocked here, not shipped from overseas. Order your 3.5 mm to 6.35 mm adapter today and use the headphones you already own.

Compatibility

Compatible with any equipment that has a 6.35mm (quarter-inch) headphone or line socket, including:

  • Hi-fi and studio headphone amplifiers
  • Guitar, bass and keyboard amplifiers with a headphone output
  • Mixing desks, audio interfaces and preamps
  • Electronic drum kits, digital pianos and stage keyboards
  • AV receivers with a front-panel headphone socket
  • DJ controllers and turntable preamps

At the other end: a 3.5mm socket, so any standard headphones, earbuds or 3.5mm lead.

⚠️ Check the direction before you order. This one has the 6.35mm plug and the 3.5mm socket — it takes a small plug and fits a big socket. If you need it the other way round, with a 6.35mm socket to take studio headphones into a phone or laptop, that is the opposite adapter.

Stereo is carried through. Three conductors at both ends, left and right both present.

⛔ Not a balanced-line or microphone adapter. It converts between two sizes of headphone connector and nothing else.

Device and brand names above are used only to describe what the adapter fits.

  • Colour : Gold-plated body and contacts
  • Connector A (Gender/Type/Version) : Male / 6.35mm (quarter-inch) TRS stereo
  • Connector B (Gender/Type/Version) : Female / 3.5mm TRS stereo
  • Direction : Takes a 3.5mm plug, fits a 6.35mm socket
  • Channels : Stereo, three conductors at both ends
  • Passive : No power, no electronics, no signal processing
  • Knurled barrel : Grips for fitting and removing without pliers

1 review for 3.5mm to 6.35mm Audio Adapter – Takes a 3.5mm Plug, Gold

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

DETAILS
Click & Collect Address:
339 Somerville Rd, Yarraville, VIC 3013
Phone : 03 9088 7510
Email : support@coreconnectaust.com.au

The Cable Guy Australia Pty Ltd Trading As Core Connect Aust · ABN 20 668 646 437
Subscribe to our newsletter
The latest news, articles, and resources, sent to your inbox monthly.

    The Cable Guy Australia Pty Ltd Trading As Core Connect Aust · ABN 20 668 646 437