$19.95 Inc GST
A polar vantage v3 charger is a small thing to lose and an easy thing to replace, provided you get the right generation. Polar changed the charging connector when this range launched, so the lead that came with an older watch will not fit a newer one — and this polar vantage v3 charger is the newer one.
The useful part: this polar vantage v3 charger is not a single-model lead. The same 2-pin magnetic connector runs across Polar’s whole current line, so one polar watch charger covers the Vantage V3, the Vantage M3, the Ignite 3, the Grit X2 Pro, the Pacer and the Pacer Pro.
That is worth knowing in a household with more than one Polar watch on the charger overnight, since a single polar vantage v3 charger serves the lot. It also means a spare polar watch charger is not a spare for one watch — it is a spare for all of them.
Polar moved to this magnetic connector with the Pacer and Ignite 3 generation and has used it since, so one polar charging cable design now covers everything current. Watches from before that — the Vantage V2, the Vantage M2 and the Ignite 2 — charge through a different connector entirely, and we stock the lead that suits those separately. If you are not certain which you have, send us the model name and we will tell you which polar charging cable you need before you order.
The quickest check before you buy a polar vantage v3 charger is the back of the watch. This generation has two small contacts that a magnet pulls onto; the earlier one has a wider port that a plastic clip grips.
The magnetic tip finds its own position. Bring this polar watch charger near the back of the case and it snaps square onto the two contacts — nothing to line up, nothing to clip shut, and no wrong way round. That matters more than it sounds when you are putting a watch on charge in the dark at the end of a long day.
This polar watch charger delivers a regulated 5V at 1A, which is what these watches ask for. Plug the far end into any USB port — a wall adapter, a laptop, a power bank or a car socket — and a flat watch is back to full inside a couple of hours.
Before replacing a polar vantage v3 charger, try the cheap fix. Two small contacts do all the work on this design and they collect sweat, sunscreen and lint, especially on a watch worn for training. Wipe the contacts on the case back and the tip of the polar charging cable, then try again.
If it charges on a fresh polar vantage v3 charger but not the old one, the fault is in the lead, and a replacement costs a fraction of a service. A worn polar charging cable usually fails at the neck of the connector where it flexes most, not in the middle of the run.
This polar vantage v3 charger is one metre of PVC-jacketed lead, long enough to reach a bedside socket without the watch hanging in mid-air, short enough to coil into a pocket of a kit bag. The magnetic tip has no moving parts to wear out, which is the main advantage this generation has over the clip it replaced — clips break, magnets do not.
Keeping a second polar watch charger where you actually train, rather than only at home, is the arrangement that stops the first one going missing.
This is a compatible polar charging cable made to fit the connector, not a Polar-made part. This polar watch charger carries the same 5V at 1A the watch expects, with the same magnetic fit. If you would rather have the manufacturer’s own, buy that; if you want a spare polar charging cable at a fraction of the price, this is that.
One 2-pin magnetic connector across Polar’s current range:
Charging generation matters. Polar introduced this magnetic connector with the Pacer and Ignite 3 generation. Earlier watches — Vantage V2, Vantage M2, Ignite 2 and before — use a different connector and need a different lead, which we stock separately. Send us your model name if you are unsure and we will confirm before you order.
Core Connect Aust is not affiliated with, endorsed by, or sponsored by Polar Electro Oy. Polar, Vantage, Ignite, Pacer and Grit X are trademarks of Polar Electro Oy, used here for compatibility reference only. This is an aftermarket accessory, not a Polar-made product.
This polar vantage v3 charger is stocked in Melbourne and ready to go — order before 10am and your polar watch charger ships the same day via Australia Post with insurance, backed by our 180-day warranty and a team who can confirm which generation your watch is before you buy.
Do not let a lost polar vantage v3 charger sideline a watch that still works. Order your polar vantage v3 charger today and keep the spare where you train.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.