USB Charger for Suunto 9 Peak – 1m Magnetic Cable, Black

Description

A charger for Suunto 9 Peak is a small thing to lose and an annoying thing to replace, because the 9 Peak does not share its cable with the watch that replaced it. This charger for Suunto 9 Peak is a direct magnetic replacement for the original lead — snap the head onto the back of the case and it charges, no adapter and no guesswork.

How this charger for Suunto 9 Peak works

The 9 Peak charges through a self-aligning magnetic head with two spring contacts that meet the pads on the case back. There is nothing to clip or clamp: bring the head close and the magnet pulls it square, so this suunto 9 peak charging cable seats correctly whichever way you happen to be holding the watch. From empty to full takes around an hour at the watch’s own pace, which makes a charger for Suunto 9 Peak easy to live with — a top-up-while-you-shower job rather than something to plan around.

The 9 Peak and the 9 Peak Pro do not share a cable

This is the detail that catches people, and worth being precise about. The original 9 Peak and the 9 Peak Pro use different cables, so a charger for Suunto 9 Peak fits only one of them. Suunto’s own guidance is that the 9 Peak’s magnet is too strong for the Pro and should not be used on it. The relationship runs one way only: the Pro’s newer cable will charge a 9 Peak, but this suunto 9 peak charging cable is not for a Pro. Not sure which you have? Ask us — we stock the lead for both.

When a Suunto 9 Peak not charging is the cable, not the watch

If you are here because of a Suunto 9 Peak not charging, rule out the cheap cause first. Two small spring contacts do all the work on this design, and they collect sweat, sunscreen and lint. Wipe the contacts on the head of the suunto 9 peak charging cable and the pads on the case back, then try again. A Suunto 9 Peak not charging on a tired lead but charging fine on a fresh one has told you where the fault is, and a replacement charger for Suunto 9 Peak costs a fraction of a battery service.

Built with the protection in the cable

The head on this suunto 9 peak charging cable is self-aligning and holds firmly enough that a nudge will not drop the watch off the desk mid-charge. The one-metre lead is PVC-jacketed so it coils and uncoils without stiffening or kinking where it meets the head. This charger for Suunto 9 Peak delivers a regulated 5V at 700mA and carries circuit protection against short circuits, overcharging, overcurrent and overvoltage — so an unfamiliar hotel USB port or a cheap wall plug does not become the watch’s problem. The plug end is standard USB-A, so this suunto 9 peak charging cable runs from a wall adapter, laptop, power bank or car.

Compatibility

Compatible with:

• Suunto 9 Peak — original model, all colours

Core Connect Aust is not affiliated with, endorsed by, or sponsored by Suunto. All brand and model names are trademarks of their respective owners and are used here for compatibility reference only. This is an aftermarket accessory, not a genuine Suunto product.

Why purchase this cable from Core Connect Aust?

This charger for Suunto 9 Peak is stocked in Melbourne and ready to go — order before 10am and your suunto 9 peak charging cable ships the same day via Australia Post with insurance, backed by our 180-day warranty and a team who can confirm it is the right lead for your watch.

Do not let a worn cable sideline a watch that still works. Order your charger for Suunto 9 Peak today and keep the spare where you actually charge.